The Arduino Uno Rev3 is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
Προσοχή: Τελευταία κομμάτια!
It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U2 programmed as a USB-to-serial converter."Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0.
The Uno and version 1.0 will be the reference versions of Arduno, moving forward. The Uno is the latest in a series of USB Arduino boards, and the reference model for the Arduino platform.
The 28BYJ-48 is a small, cheap, 5 volt geared...
TT motor bracket screw nut T size 35mm x 15mm...
Color: Red Type: Common anode Size:...
Βάση δοκιμών για Arduino UNO R3 board και...
Pin Header 2x40 pins straight. Suitable for...
Soldering iron for anybody work-room. It´s...