Κανένα προϊόν
Οι τιμές είναι μετά φόρων
Filament type: PET-G Colour: Super Blue Transparent Printing...
Filament type: PET-G Colour: Light Gray Printing temperature: 220-250°C...
Filament type: PET-G Colour: Graphite Printing temperature: 220-250°C...
Filament type: PET-G Colour: Galaxy Gray Printing temperature:...
Filament type: PLA Colour: Bright Green Printing temperature: 200-235°C...
Χρώμα: διαφανές Πυκνότητα στους 20° C: 0,79 g / cm3 Σημείο ανάφλεξης: 12...
Ιδανικό για χειροκίνητη επικασσιτέρωση για την αποκατάσταση της...
STM32G071RBT6 microcontroller in LQFP64 package 32.768 kHz crystal...
Κατασκευαστής: Nextool Μοντέλο: NE0126 Φωτεινότητα: έως 2000lm Χρόνος...
Τύπος: Mπαταρία λιθίου Κατηγορία: CR2032 Τάση μπαταρίας: 3V Συσκευασία:...
Παρασκευή που περιέχει υψηλής καθαρότητας ισοπροπυλική αλκοόλη που...
Εργονομικός σχεδιασμός για άνετη χρήση Οπτικός σένσορας ανάλυσης...
Σύνδεση: Ασύρματη 2.4GHz Εμβέλεια: έως 10m Ανάλυση: 800/1200/1600 dpi...
Speaker size: 14.2mm Sensitivity: 91dB ± 3dB Frequency range:...
Συνδεσιμότητα: Bluetooth v5.0, mini-jack 3,5mm, Ασύρματο, Ενσύρματο...
Total power output:RMS 24W Frequency response:70 HZ-20 KHZ +/-9db Signal...
Producer: Rebeltec Model: Long+ Width: 780 mm Length: 300 mm Thickness:...
Producer: Rebeltec Model: SliderM+ Width: 350 mm Length: 250 mm...
Producer: Rebeltec Model: SliderS+ Width: 250 mm Length: 200 mm...
Gaming USB Sound Card Chipset: CM108B 2.0 Cable length: 1.2m Wire...
TrueWireless Stereo Plus for easier pairing and better connectivity Up...
TrueWireless Stereo Plus for easier pairing and better connectivity Up...
Reinforced, braided cable braid Quick Charge: 1.5A (max) Features: fast...
iPhone 14 Pro Max Protect phone screen Resistant to scratches and...
iPhone 14 Pro Protect phone screen Resistant to scratches and absorbs...
iPhone 14 Plus Protect phone screen Resistant to scratches and absorbs...
iPhone 14 Protect phone screen Resistant to scratches and absorbs...
iPhone 13 / 13 Pro Protect phone screen Resistant to scratches and...
iPhone 13 Pro Max Protect phone screen Resistant to scratches and...
iPhone 13 Mini Protect phone screen Resistant to scratches and absorbs...
Compatibility: USB v2.0 standard Serial:RS-485 Serial: Screw terminal...
The onboard MAX485 chip is a low power consumption, limited swing rate...
The Arduino Mini without headers is a small microcontroller board intended for use on breadboards and when space is at a premiumand. The revision 05 has a new package for the ATmega328 (datasheet), which enables all components to be on the top of the board. It also has an onboard reset button. The 05 version has the same pin configuration as revision 04
The Arduino Mini is a small microcontroller board intended for use on breadboards and when space is at a premium. The revision 05 has a new package for the ATmega328 (datasheet), which enables all components to be on the top of the board. It also has an onboard reset button. The 05 version has the same pin configuration as revision 04.
The Arduino Micro packs all of the power of the Arduino Leonardo in a 48mm x 18mm module (1.9" x 0.7").It makes it easier for makers to embed the Arduino technology inside their projects by providing a small and convenient module that can be either used on a breadboard or soldered to a custom designed PCB.
With the new Arduino M0 board, the more creative individual will have the potential to create one’s most imaginative and new ideas for IoT devices, wearable technologies, high tech automation, wild robotics and other not yet thinkable adventures in the world of makers. *See below for more details
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
The Arduino Leonardo is a microcontroller board based on the ATmega32u4. The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port....
The Arduino Uno SMD R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.
The Arduino Uno Rev3 is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
With the new Arduino M0 pro board, the more creative individual will have the potential to create one’s most imaginative and new ideas for IoT devices, wearable technologies, high tech automation, wild robotics and other not yet thinkable adventures in the world of makers. *See below for more details
The Arduino Due is the newcomer microcontroller board in the Arduino boards family. It’s the first board based on a 32 bit processor (Atmel SAM3X8E ARM Cortex-M3 MCU), which improves all the standard Arduino functionalities and adds many new features. * WITHOUT HEADERS * *See below for more details
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
The Arduino Mega ADK (Android Development Kit) is like the Mega with a USB host interface to connect with Android based phones. You can easily create your own Android App to control the Arduino world. *See below for more details