No products
Prices are tax included
New products
-
Ugreen Crimping tool for RJ45/RJ11 NW136 70683
Ugreen Crimping Pliers, designed with emphasis on comfortable use. The...
12,10 € -
Ugreen 10x Plug RJ45 8P8C (UTP Cat. 5/5e/6) Silver
Brand: Ugreen Materials: nickel + copper Connector type: RJ45 Quantity...
2,20 € -
Waveshare 14513 Edge Breakout for micro:bit
This is an edge connector expansion board designed for micro:bit,...
12,70 € -
High Torque Servo MG996R Metal Gear 180degrees
Dimension : 40mm x 19mm x 43mm Weight : 55g Operating Speed : 0.17sec /...
9,30 € -
Waveshare 15072 Servo Driver for micro:bit
Power supply: 5V (POWER connector) OR 6V~12V (VIN terminal) Servo...
19,10 € -
Ugreen USB Optical Wireless Mouse 2.4GHz 4000 DPI black (MU006)
Brand: Ugreen Model: MU006 Mouse type : wireless Sensor type : optical...
11,50 € -
UGreen LP230 Adjustable Laptop Desk Stand - Silver
Brand: Ugreen Model: LP230 Compatibility: with laptops from 11'' to...
9,75 € -
DHabotest HT108L Digital Universal Multimeter
Model: HT108L DC: 200mV/2V/20V/200V/600V AC: 20V/200V/600V DC current:...
8,75 € -
Philips Power Bank 10000mAh, 2x USB, 2.1A, Black
Battery Capacity: 10000mAh 3.7V Battery energy: 37Wh Battery type:...
15,20 € -
100 x AA Maxell Alkaline Batteries LR6 1.5V
ΓΙΑ ΠΡΟΣΦΟΡΑ ΣΕΤ ΑΑ και ΑΑΑ ΔΕΙΤΕ ΕΔΩ Maxell Αλκαλικές Μπαταρίες LR6...
26,25 € -
Powertech PT-490 Super Series Thermal Paste 3gr
Color: Grey Thermal Conductivity: >5.15 Thermal impedance: <0.004...
1,90 € -
Maxell 6LR61/9V Alkaline Battery
Type: alkaline battery Voltage [V]: 9 Packaging: Blister 1 pc Other...
1,30 € -
MAX7219 Dot Matrix Module 4-in-1 Display For Arduino
A single module can drive a 8x8 dot matrix common cathode Working...
11,20 € -
Devil Filament PET-G 1.75mm 1Kg Super Blue Transparent
Filament type: PET-G Colour: Super Blue Transparent Printing...
22,00 € -
Devil Filament PET-G 1.75mm 1Kg Light Gray
Filament type: PET-G Colour: Light Gray Printing temperature: 220-250°C...
22,00 € -
Devil Filament PET-G 1.75mm 1Kg Graphite
Filament type: PET-G Colour: Graphite Printing temperature: 220-250°C...
23,00 € -
Devil Filament PET-G 1.75mm 1Kg Galaxy Gray
Filament type: PET-G Colour: Galaxy Gray Printing temperature:...
23,00 € -
Devil Filament PLA 1.75mm 1Kg Bright Green
Filament type: PLA Colour: Bright Green Printing temperature: 200-235°C...
21,40 € -
Termopasty Kontakt 500ml IPA Plus 99.8%
Color: transparent Density at 20° C: 0.79 g/cm3 Flash point: 12 ° C...
4,90 € -
AG Termopasty Flux TK83 100ml
Ideal for manual soldering for restoring solderability Density at 20° C:...
5,20 €
Pumps There are 2 products.
1,10 € Available
2,40 € AvailableMini Water Pump 120 l/h Submersible
DC Voltage: 2.5 - 6V Working Current: 130 - 220mA Power: 0.4 - 1.5W Maximum Lift: 40 - 110cm Flow Rate: 80 - 120l/h Outside diameter of water outlet: approx. 7.5mm Inside diameter of water outlet: approx 4.7mm Size (Diameter x Lenght x Height): approx. 24mm x 45mm x 33mm Wire Length: apro. 15 - 20cm Material: Plastic Continuous Working Life: 500 hours
2,40 €Available