• Banner

Reference: PRD-000083

Brand: OEM

LED RED 5mm

Specifications: THT Mounting Color RED 5mm Operating Voltage 1.8-2.4V
Price €0.10
More
Available

Reference: PRD-000861

Brand: PANASONIC

Panasonic 18650 3400mAh NCR18650B

Manufacturer: PANASONIC Rechargeable battery type: Li-Ion Battery size: MR18650 Rated voltage: 3.6V Capacity: 3350mAh Body dimensions: Ø18.2 x 65mm Max Current: 6.7A Unprotected Flat top
Price €5.70
More
Available

Reference: PRD-001675

Brand: PANASONIC

Panasonic Photo Lithium Battery CR123

Brand: Panasonic Type: Lithium Voltage: 3V Capacity: 1550mAh Dimensions: 17 Ø x 34.5 mm Applications: Photo cameras, wireless sensors, measuring equipment The CR123A is a powerful lithium battery with low self-discharge. This battery is characterized by a constant voltage output and is functional at temperatures from -40 to +60 ° C.
Price €1.70
More
Available

Reference: PRD-000082

Brand: OEM

LED GREEN 5mm

Specifications: THT Mounting Color GREEN 5mm Operating Voltage 2.2-2.5V
Price €0.10
More
Available

Reference: PRD-001028

Brand: OEM

LED WHITE 5mm

Specifications: THT Mounting Color WHITE 5mm Operating Voltage 2.8-3.4V
Price €0.10
More
Available

Reference: PRD-001378

Brand: SAMSUNG

Samsung INR18650-35E 3500mAh 3.7V

Manufacturer: SAMSUNG Rechargeable battery type: Li-Ion Battery size: MR18650 Rated voltage: 3.6V-3.7V Capacity: 3500mAh Body dimensions: Ø18.55 x 65.25mm Max Current: 13A Unprotected Flat top
Price €5.70
More
Available

Reference: PRD-000596

Brand: OEM

LED YELLOW 5mm

Specifications: THT Mounting Color YELLOW 5mm Operating Voltage 1.8-2.6V
Price €0.10
More
Available

Reference: PRD-000586

Brand: OEM

M3 Nut

Nut shape: Hexagonal Thread: M3 Height: 2.4mm Spanner size: 5.5mm Color: Silver
Price €0.03
More
Available
All best sellers
Shields

Shields

Active filters

Reference: PRD-001589

Brand: HAITRONIC

Sensor Shield v5.0 expansion board for Arduino

Sensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already
Price €2.40
More
Available

Reference: PRD-000835

Brand: OEM

UNO Proto Expansion Shield with breadboard 170

Prototype Size:7cm x 5.5cm x 2cm Mini breadboard size: 4.4 x3.4 x1cm Self-adhesive breadboard SOIC place for IC Buttons: 2 LED: 2 Package Included: 1 x Arduino Prototyping Prototype Shield Proto Shield Board 1 x Mini Breadboard 170 Points.
Price €2.60
More
Available

Reference: PRD-001482

Brand: OEM

L293D Motor Drive Shield (for Arduino)

Drives 4 DC or 2 stepper or 2 Servo motors Up to 4 bi-directional DC motors with individual 8-bit speed selection Up to 2 stepper motors (unipolar or bipolar) with single/double coil or interleaved stepping 4 H-Bridges: 0.6A per bridge (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC 2 external terminal power interface, for...
Price €3.40
More
Available

Reference: PRD-000813

Brand: ARDUINO

Arduino Wireless PROTO Shield

The Wireless Proto shield allows an Arduino board to communicate wirelessly using a wireless Xbee module from Digi. It can also use any module with the same footprint. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight).
Price €15.90
More
Out-of-Stock

Reference: PRD-000574

Brand: OEM

Ethernet Shield W5100 (Arduino Compatible)

Ethernet Shield, based on the Wiznet W5100 Chip Supported by the official Ethernet Library Micro-SD card slot Compatible with Duemilanove (168 or 328), Uno & Mega (1280/2560) Network (IP) stack capable of both TCP and UDP Supports up to 4 simultaneous socket connections
Price €19.50
More
Available

Reference: PRD-000575

Brand: INNOESYS

Innoesys Educational Shield for Arduino

Innoesys Educational Shield is an Arduino UNO shield that has all the necessary components and sensors on it, for the beginner to start programming Temperature Sensoor Potentiometer Photo Sensor Relay Servo Motor Support ON-OFF Switch Buzzer 3 x LEDs (Red, Green, Blue) 5 x Pushbuttons Manufacturer: Innoesys (www.innoesys.com) For detailed information and...
Price €22.00
More
Out-of-Stock

Reference: PRD-000461

Brand: ARDUINO

Arduino 4 Relays Shield

The Arduino 4 Relays Shield is a solution for driving high power loads that cannot be controlled by Arduino's digital IOs, due to the current and voltage limits of the controller. Operating Voltage: 5V Coil current consumption: 140 mA (with all releays on, about 35mA each) Single pole chargeover contact maximum current: 30V DC 2A Maximum load voltage:...
Price €30.40
More
Available

Reference: PRD-000380

Brand: INNOESYS

Innoesys 4 DAC Shield for Arduino

Microchip MCP4728 12-bit Quad channel DAC 4 analogue buffered or un-buffered outputs Voltage gain using potentiometer Jumper Configurable Voltage amplifier with external power source up to 26V Manufacturer: Innoesys (www.innoesys.com) ** For detailed information refer to the datasheet below
Price €32.00
More
Out-of-Stock

Reference: PRD-000454

Brand: ARDUINO

Arduino Motor Shield

The Arduino Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. Operating Voltage: 5V to 12V Motor controller: L298P, Drives 2 DC motors or 1 stepper motor Max current: 2A per channel or 4A max (with external power supply) Current sensing: 1.65V/A
Price €32.40
More
Available

Reference: PRD-000074

Brand: ARDUINO

Arduino Ethernet Shield 2

The Arduino Ethernet Shield 2 connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino Board, connect it to your network with an RJ45 cable (not included) and follow a few simple steps to start controlling your world through the internet. A000024 (without PoE) 
Price €32.60
More
Available

Reference: PRD-001062

Brand: ARDUINO

Arduino Ethernet Shield 2 with PoE

The Arduino Ethernet Shield 2 connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino Board, connect it to your network with an RJ45 cable (not included) and follow a few simple steps to start controlling your world through the internet. A000025 (with PoE) 
Price €39.00
More
Out-of-Stock

Reference: PRD-000641

Brand: INNOESYS

Innoesys LoRa Shield Dual Band (433MHz, 868MHz)

Innoesys LoRa Shield is an Arduino shield for Low-Power Wide-Area Networks (LPWAN) designed for long range communications with low bitrate. *** Long range: greater than 15 km *** Applications: Internet of Things Sensor networks Agriculture applications Industrial automation Smart city Smart meters Home automation Manufacturer: Innoesys (www.innoesys.com)...
Price €39.80
More
Out-of-Stock

Follow us on Facebook