Information

New products

Peripherals There are 59 products.

per page
Showing 1 - 18 of 59 items
  • 12,00 € 15,00 € Available
    Sale!

    Useful for prototyping/projects. Invensense MPU-6050 6-Axis (Gyro & Accelerometer) Very useful in prototyping systems Jumper Configurable 1x10 pin header Power supply configurable (5V or 3.3V) I2C Pull-up resistors Includes pin header & jumpers Manufacturer: Innoesys (www.innoesys.com) ** For Detailed information refer to the datasheet below

    12,00 € 15,00 €
    Available
  • 1,50 € Available

    This Thumb Joystick is similar to the 'analog' joystick on PS2 controllers. The X and Y axis are two 10k potentiometers which control 2D movement by generating analog signals. The joystick also has a push button that could be used for special applications

    1,50 €
    Available
  • 2,50 € Available

    This is a half-size breadboard with 400 tie points. It is solderless allowing to easily connect circuits of electronic components. 400 tie point breadboard Color: White 30 x 5 x 2 & 2x5x10 points ABS plastic material Completely reusable Coordinates for easy component placement Stackable Accepts a variety of wire sizes (20-29 AWG) Dimensions: 82mm x...

    2,50 €
    Available
  • 1,20 € Available

    Color: Black Type: Mini Male Connector Length: 1m

    1,20 €
    Available
  • 2,00 € Available

    Version 1.3 resolution: Full 1080P Supported. Supports 480i—1080p resolution. Supports standard, enhanced, or high-definition video, plus multi-channel digital audio. Supports True HD & DTS-HD. Gold plated, easy to connect and plug-and-play.

    2,00 €
    Available
  • 12,50 € 15,00 € Available
    Sale!

    Manufacturer: SANDISK Type: SD HC Micro Storage Capacity: 64GB Speed Class: Class 10 Suitable for iPad, Tablet, Cellular, Digital Camera, GPS, Mp3, Raspberry etc.

    12,50 € 15,00 €
    Available
  • 7,20 € 8,20 € Available
    Sale!

    Manufacturer: SANDISK Type: SD HC Micro Storage Capacity: 32GB Speed Class: Class 10 Suitable for iPad, Tablet, Cellular, Digital Camera, GPS, Mp3, Raspberry etc.

    7,20 € 8,20 €
    Available
  • 5,60 € Available

    Manufacturer: SANDISK Type: SD HC Micro Storage Capacity: 16GB Speed Class: Class 10 Suitable for iPad, Tablet, Cellular, Digital Camera, GPS, Mp3, Raspberry etc.

    5,60 €
    Available
  • 6,40 € Available

    Your microcontroller probably has an ADC (analog -> digital converter) but does it have a DAC (digital -> analog converter)? This breakout board features the easy-to-use MCP4725 12-bit DAC. Control it via I2C and send it the value you want it to output, and the VOUT pin will have it. Great for audio / analog projects, such as when you can't use PWM...

    6,40 €
    Available
  • 9,00 € Available

    MPU-9250 9DOF GY-9250 Module Nine-axis (Altitude, Gyro, Accelerator, Magnetometer) Power: 3-5v (internal low dropout regulator) Standard IIC / SPI protocol 16bit AD converter-chip 16-bit data output Gyro range: ± 250 500 1000 2000 ° / s Acceleration range: ± 2 ± 4 ± 8 ± 16g Magnetic field range: ± 4800uT Pitch: 2.54mm Module size 15 x 25mm

    9,00 €
    Available
  • 7,00 € Available

    You can plug the 40-pin GPIO cable between the Raspberry Pi and the extension board. Package included: 1 x GPIO extension Board for Raspberry Pi 1 x 40 pin cable Features: No soldering required Labeled pins Breadboard compatible Break out power, GPIO, I2C and SPI pins *Breadboard not included

    7,00 €
    Available
  • 14,50 € Available

    U-blox NEO-6M GPS moduleCeramic-Antennabuild-in EEPROMThis module is compatible with APM2 and APM2.5, and EEPROM can save all your configuration data.Interface: RS232 TTLPower: 3-5vBaudrate default:9600bps

    14,50 €
    Available
  • 2,00 € Available

    Supports Micro SD cards, Micro SDHC card (high speed card) Level conversion circuit board that interfaces level for 5V or 3.3VPower supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit boardStandard communication interface SPI interface Perfect for Arduino Projects and more 4xM2 screw positioning holes for easy installation

    2,00 €
    Available
  • 1,20 € Available

    The Photo Resistor Module is used to indicate the presence or absence of light. The module can also be used to measure light intensity. This module allows for easy sensing of light levels from within your Arduino controller. Photosensitive Sensor Operating voltage 5V

    1,20 €
    Available
  • 1,50 € Available

    Red Dot Laser Operating voltage 5V Power 5Mw Wavelength 650n m OD 6mm

    1,50 €
    Available
  • 6,80 € Available

    Input voltage: 3.6-6V Working current: matching for 30 mA, matching the communication for 10 mA Output Power Class: Class 2 Size: 43mm x 15mm

    6,80 €
    Available
  • 4,00 € Out of stock

    Current :13-26mA / DC 3.3V Idle Current :10-13mA / DC 3.3V Sleep current: <80uA Peak current: <30mA Operating Frequency: 13.56MHz Supported card types: S50, S70, UltraLight, Pro, Desfire Dimensions: 40mm × 60mm Operating temperature: -20... -80 degrees Celsius Storage temperature: -40... -85 degrees Celsius Humidity: 5% -95% Data Transfer Rate: Max. 10Mbit/s

    4,00 €
    Add to cart More
    Out of stock
  • 10,00 € Out of stock

    The Official Raspberry Pi Power Supply! This PSU supports up to 3A of current, so it won't let you down when powering hungry devices through your Raspberry Pi 4 5.1V 3A Output 1.5m Cable 18 AWG captive cable Output Connector: USB-C AC 100-240V 50/60Hz input 15.3W maximum output power

    10,00 €
    Add to cart More
    Out of stock
Showing 1 - 18 of 59 items