Information

New products

Meters There are 17 products.

Showing 1 - 17 of 17 items
  • 28,50 € Available

    Manufacturer: UNI-T Type: Electrical Display: LCD AC voltage measuring range: 12/24/50/120/230/400/690V Bandwidth for AC voltage measurements: 0...400Hz DC voltage measuring range: 12/24/50/120/230/400/690V Continuity test: 0...100kΩ Dimensions: 275 x 51 x 30mm Weight: 210g Power supply: 2 batteries 1,5V LR03 (AAA) Features: autoranging

    28,50 €
    Available
  • 48,00 € Available

    100A AC and DC current measurement with 1mA resolution True RMS response for AC current V.F.C function for measuring signal at variable frequency  600V AC and DC voltage measurement Resistance, diode, continuity and capacitance functions Non-contact voltage detection with LED indication Display backlight Data HOLD, MAX, MIN, MAX-MIN, and ZERO model

    48,00 €
    Available
  • 6,80 € Available

    The UT20B pocket multimeter measures DC voltage, AC voltage, current, resistance & diodes. Max DC / AC volts: 300V Max current: 200mA Max resistance: 2Mohm Typical accuracy: 2.5%

    6,80 €
    Available
  • 37,50 € Available

    Manufacturer: UNI-T Type: Electrical Display: LCD, LED bargraph indicating 7 voltage levels AC voltage measuring range     12/24/50/120/230/400/690V      AC voltage measuring accuracy     ±(1,5% + 1 digits)      DC voltage measuring range     12/24/50/120/230/400/690V Continuity test: 0...100kΩ Power supply: 1 battery 1,5V LR03 (AAA)

    37,50 €
    Available
  • 1,40 € Available

    Product Size: 29 x 15 x 3mm Product weight: 1.3g Input voltage range: 9-26V

    1,40 €
    Available
  • 3,00 € Available

    L1  -  1.5-8.99V L2  -  9V L3  -  10V L4  -  10.6V L5  -  11.4V Product size: 2.7 x 62 x 15.8 mm

    3,00 €
    Available
  • 1,80 € Available

    Display color: Red Two-wire Measurement range: DC 2.45~30V Working Current:< 23mA Working Temperature: -10C-65C Maximum input voltage: DC 30V Permissible error: 1%(±1 digit) Display mode: three digit 0.36''LED digital tube Size: 21.5 x 13 x 8mm (L*W*H) Speed ratio: about 200ms/time Lead wire length: 15cm

    1,80 €
    Available
  • 6,80 € Available

    3 1/2 Digital LCD Overload Protection (0.5A/250V fuse, 10A no fuse) DC Volt: 200mV-600V, Accuracy Level: ±(1.0%+2dgt) AC Volt: 200V-6000V, Accuracy Level: ±(2.0%+10dgt) DC Current: 200μA-200mA, Accuracy Level: ±(1.5%+2dgt) Resistance: 200Ω-2000KΩ, Accuracy Level: ±(1.2%+2dgt) Power: 9V Battery Size: 122*67*21mm Black Color Package: DT-830D (no Battery)...

    6,80 €
    Available
  • 32,00 € Available

    Measuring instrument features: auto and manual ranging automatic power-off HOLD function REL function impact resistant holster measures frequency, capacitance and temperature diode and continuity test with buzzer overflow indicator LCD duty cycle measurement low battery indicator Standard equipment: test leads drop-like K-type temperature probe

    32,00 €
    Available
  • 1,00 € Available

    Mini measure tape with Keyring 1m Lenght 6mm Wide

    1,00 €
    Available
  • 3,50 € Available

    Specification: Size: 40mm x 25mm x 11mm Color: Red   Package Content: 1 x 1-8S Battery Voltage Buzzer Alarm

    3,50 €
    Available
  • Measuring instrument features:autoranging automatic power-off large, backlit LCD with bargraph HOLD function MIN/MAX function USB interface measures active, reactive and apparent power, power factor and phase angle overload protection contactless voltage detector 99 measurement memory low battery indicator

  • 15,40 € Available

    Digital-Multimeter 3 ½-digit TÜV/GS approved pocket size digital multimeter. 3 ½ digit, 12 mm LCD-display, max. 1999 Current measurements up to 10 A DC Diode- and continuity test Temperature measurements Safety: TÜV/GS; EN-61010-1; CAT III 300 V Modern Design Accessories: test leads, type K-thermocouple probe, battery & operation manual

    15,40 €
    Available
  • 5,00 € Available

    The illustrated temperature probe is a K-type thermocouple (NiCrNi). This temperature probe can be used for all digital thermometers pictures in our catalogue range. Bead probe for general measurement applications, not suitable for immersion measurements. Range: -40°C - +204°C/-40°F - +399°F Accuracy: ± 0.5 % Cable length: 200 cm Probe: 1.5 mm

    5,00 €
    Available
  • 23,80 € Available

    The clamp adapter is a transducer that enables ACA measurements to be performed in conjunction with a multimeter. When measuring current using a clamp adapter, it is not necessary to break the circuit or remove insulation. Equipped with hand guards for safety IEC-1010-1, CAT II 600 V ACA: 200A, ±2.0% + 0.5A (40-400 Hz) Output: 1 mV AC/A Conductor...

    23,80 €
    Available
  • 20,00 € Available

    AC Current 2A/20A/200A ±(1.0%+9) Display Count 2000 Jaw Capacity 17mm Data Hold LCD backlight Auto Power Off Low Battery Indication Input Protection Power: 1.5V AAA (2x) LCD Size: 39.3x26.5mm Weight: 160g Size: 155x60x33.5mm

    20,00 €
    Available
  • 4,00 € Available

    Specification Measurement Range: 0-100V (99.9) Led Color:Red Power Supply:DC 4V-30V Low power consumption Three wires

    4,00 €
    Available
Showing 1 - 17 of 17 items