Information

New products

Sensors There are 46 products.

per page
Showing 1 - 18 of 46 items
  • 0,20 € Available

    Photoresistor is a resistor which made of semi-conductor material,and the conductance changes with luminance variation . The photoresistor can be manufactured with different figures and illuminated area based on this characteristic. Model: GL5528 Max Voltage (DC): 150V Max Power Consumption: 100mW Photo resistance : 20k Ohm Dark resistance : 1M Ohm

    0,20 €
    Available
  • 1,90 € 2,50 € Available
    Sale!

    Features Voltage : 5VDC) Current: <2mA. Output signal: Electric frequency signal, high level 5V, low level 0V. Sensor angle: <15 degrees. Detection distance: 2cm-450cm. High precision: Up to 0.3cm Input trigger signal: 10us TTL impulse Echo signal : output TTL PWL signal  Mode of connection:  VCC trig(T) echo(R) GND 

    1,90 € 2,50 €
    Available
  • 3,00 € Available

    DS18B20 temperature sensor 9 to 12 bit adjustable resolution 1-Wire interface- requires only one digital pin for communication Power supply range:3.0V-5.5V ±0.5°C Accuracy from -10°C to +85°C Usable temperature range: -55 to 125°C (-67°F to +257°F) Stainless steel tube size:Approx.6*50mm(Diameter*Length) red (VCC), yellow(DATA) , black(GND)  Cable length:...

    3,00 €
    Available
  • 6,50 € Available

    Model number: TEC1-12708 12V8A  72W Voltage: 12V Couples: 127 Umax (V): 15.2 Imax (A): 8 Tmax: 67 QM(W):80.3 W Resistance ( Ω): 1.5 ~ 1.6 Dimensions: 40x40x3.5 mm 

    6,50 €
    Available
  • 1,20 € Available

    The Photo Resistor Module is used to indicate the presence or absence of light. The module can also be used to measure light intensity. This module allows for easy sensing of light levels from within your Arduino controller. Photosensitive Sensor Operating voltage 5V

    1,20 €
    Available
  • 2,00 € Available

    Specification: Signal Processing; BISS0001IC Voltage: 5V – 20V Power Consumption: 65mA TTL output: 3.3V, 0V Delay time: adjustable (0.3 sec – 10 minutes) Lock time: 0.2 sec Trigger methods: L – disable repeat trigger, H - enable repeat trigger Range: <120 degree, <7 meters Temperature: – 15 ~ +70 Dimension: 32x24 mm

    2,00 €
    Available
  • 17,50 € Available

    U-blox NEO-6M GPS moduleCeramic-Antennabuild-in EEPROMThis module is compatible with APM2 and APM2.5, and EEPROM can save all your configuration data.Interface: RS232 TTLPower: 3-5vBaudrate default:9600bps

    17,50 €
    Available
  • 1,80 € Available

    Manufacturer: MAXIM INTEGRATED Type: temperature sensor Kind: digital thermometer Temperature measuring range: -55...125°C Case: TO92 Mounting: THT Interface: 1-wire Temperature measurement accuracy: ±2°C Converter resolution: 12bit Supply voltage: 3...5.5V

    1,80 €
    Available
  • 5,20 € Available

    Model: TEC1-12706 Size: 40mm x 40mm x 4mm Operates from 0~15.2V DC and 0~6A Operates Temperature: -30 to 70 Max power consumption: 60 Watts Net weight: 22g Color: White

    5,20 €
    Available
  • 11,00 € Available

    Sensing area (Sensing range) : 0.5 "circle  The Output signal (Output signal) : Passive variable to hold  The Force sensitive range (range), pressure test: 100 g to 10 kg  Dimensions:  length: 2.375" width: 0.75" Sensing diameter: 0.5"

    11,00 €
    Available
  • 5,00 € Available

    Model number: TEC1-12704 12V3A  36W Voltage: 12V Couples: 127 Umax (V): 15.2 Imax (A): 12 Tmax: 67 QM(W): 36 W Resistance ( Ω): 3.0 ~ 3.3 Dimensions: 40x40x4.2 mm

    5,00 €
    Available
  • 1,80 € Available

    This is a low cost humidity and temperature sensor with a single wire digital interface. The sensor is calibrated and doesn't require extra components so you can get right to measuring relative humidity and temperature. DHT11 output calibrated digital signal.  *See below for more details

    1,80 €
    Available
  • 1,50 € Available

    Hall Magnetic Force Sensor KY-003 Module

    1,50 €
    Available
  • 2,50 € Available

    Module Features:  Detection: Fire / Flame Light Source Wavelength: 760nm to 1100nm Detection angle: 60 degrees Sensitivity: Adjustable by potentiometer Operating Voltage 3.3V-5V  Output: Digital & Analog PCB size: 3.2cmx1.4cm  fixed bolt holes for easy installation 

    2,50 €
    Available
  • 1,50 € Available

    TCRT5000 IR reflex sensors Stable LM393 chipset in comparator Digital potentiometer for sensibility adjustment Clean comparator output signal Fixed bolt hole for easy installation Detection Range:  1mm to 25 mm Focus Range: 2.5 mm Driving Ability: > 15 mA Working Voltage: 3.3 V to 5 V Output: digital switch outputs (0 and 1) PCB Size: 3.2 x 1.4 cm

    1,50 €
    Available
  • 2,00 € Available

    Features:High quality 5v relay. LED status indicator High Current relay, AC250V 10A ; DC30V 10A Perfect for Arduino Projects and more Product may differ from the picture

    2,00 €
    Available
  • 2,50 € Available

    Light intensity sensor module Data output range resembles luminance from 0-65535 lux I2C Interface No external parts required Provides simple digital output

    2,50 €
    Available
  • 2,00 € Available

    CR2025 Battery Launch distance: 8m (concrete and the surrounding environment, the sensitivity of the receiving end of) Effective angle: 60 degrees Stable quality, cost-effective Paste material: 0.125mmPET effective life of 20,000 times Quiescent current 3-5uA, dynamic current 3-5mA

    2,00 €
    Available
Showing 1 - 18 of 46 items