Information

New products

Arduino / Genuino There are 163 products.

per page
Showing 1 - 18 of 163 items
  • 15,90 € 19,90 € Available
    Sale!

    Beginners Kit for your first Arduino project/tutorial. See the details below. 1 x 10K Potentiometer 10 x LED Red 10 x LED Green Resistors: 20 x 220R, 10 x 10K, 10 x 100R 1 x Pushbutton 1 x Hook-up wires 65pack 1 x Breadboard half-size 400 1 x Buzzer 3 x Photoresistor 1 x LED RGBs 1 x Ultrasonic Range Finder 1 x USB Type A to B cable 1 x 9V Battery snap

    15,90 € 19,90 €
    Available
  • 0,60 € Available

    Jumper Cable wires usefull for connect electronic components on a breadboard without soldering. Both ends of the wires are male pins. It comes in multi colors pack Premium Jumper Wires Pack of 10 in different colors Male / Male Connector Lenght 20cm Suitable with 2.54mm Pitch

    0,60 €
    Available
  • 9,20 € Available

    A strong performer with a very smooth movement and good centering. Excellent for parkflyers or planes up to .40 size (3,500mAh electric). Stall torque : 2.5kg.cm / 2.7kg.cm Operating speed : 0.14sec.60o / 0.13sec.60o Weight: 12.5g *See below for more information

    9,20 €
    Available
  • 1,40 € Available

    Features: 8 pins connector Αdhesive mounting Maximum Circuit Rating: 35VDC, 100mA Insulation Resistance: 100M Omh, 100V Dielectric Withstand: 250VRms (50-60Hz, 1min) Contact Bounce: <=5ms Life Expectancy: 1 million closures Operation Temperature: 0 to +70 centigrade Pad Size (L x W): ~76 x 69 mm Cable Length: ~83 mm

    1,40 €
    Available
  • 1,00 € Available

    Small motor for hobby/projects. Operates from 1V to 6V. 0.35A - 0.40A Operation Voltage: 1V - 6V

    1,00 €
    Available
  • 1,20 € Available

    Chip: MAX232 RXD / TXD transceiver communication indicator Connector: DB9 Size: aprox. 32mm x 32mm x 16mm Interface: VCC. RXD, TXD, GND

    1,20 €
    Available
  • 17,50 € Available

    U-blox NEO-6M GPS moduleCeramic-Antennabuild-in EEPROMThis module is compatible with APM2 and APM2.5, and EEPROM can save all your configuration data.Interface: RS232 TTLPower: 3-5vBaudrate default:9600bps

    17,50 €
    Available
  • 5,40 € Available

    Type: Character Display and 6 keys Keypad 2-lines X 16-characters Blue Backlight High Contrast Operation Voltage: 5V DC Module dimension: 80 x 57 x 21mm Large viewing angle suitable for Arduino Uno, Mega contrast adjustable via potentiometer

    5,40 €
    Available
  • 6,60 € 8,00 € Available
    Sale!

    SpecificationAdopts Atmel Atmega328 microcontroller Digital I/O port: 0~13 Analog I/O port: 0~5 Supports ISP download function Input voltage: When connected with PC USB, there is no need for external power source; for external power source: 5V~9V DC voltage input. Output voltage: 5V DC voltage output and 3.3V DC voltage output. *Pin strip is included in...

    6,60 € 8,00 €
    Available
  • 3,50 € 4,00 € Available
    Sale!

    Small servo motor for Robotics & Arduino projects. It operates from 4.2V to 6V. 150mm cable with connector Weight: 9γρ Dimensions:23mm x 12.5mm x 30mm Stall Torque: 1.6kg/cm (5V) Operating speed: 0.3sec/60degree (4.8V) Operating voltage:4.2-6V Temperature range: 0°-55°C Suitable for R/C and Models Dual ball bearing Comes with 3 different servo horns...

    3,50 € 4,00 €
    Available
  • 0,50 € Available

    Make your Arduino portable. Connect the power of your Arduino board to a 9V battery with this adapter. **Batteries not included.

    0,50 €
    Available
  • 2,00 € Available

    Features:High quality 5v relay. LED status indicator High Current relay, AC250V 10A ; DC30V 10A Perfect for Arduino Projects and more Product may differ from the picture

    2,00 €
    Available
  • 9,00 € Available

    MPU-9250 9DOF GY-9250 Module Nine-axis (Altitude, Gyro, Accelerator, Magnetometer) Power: 3-5v (internal low dropout regulator) Standard IIC / SPI protocol 16bit AD converter-chip 16-bit data output Gyro range: ± 250 500 1000 2000 ° / s Acceleration range: ± 2 ± 4 ± 8 ± 16g Magnetic field range: ± 4800uT Pitch: 2.54mm Module size 15 x 25mm

    9,00 €
    Available
  • 6,00 € Available

    Pulse sensors can be put on the finger or earlobe, through interconnected line can be connected to the Arduino. It also has an open source app, can real time your heart rate graph display.Essence is a integrated optical amplifying circuit and noise eliminating circuit heart rate sensor. Supply voltage: 3.3V ~ 5 V Diameter: 16mm Magnification: 330 LED...

    6,00 €
    Available
  • 10,00 € Available

    BT V4.0 BLE Working frequency: 2.4GHz ISM band Modulation method: GFSK(Gaussian Frequency Shift Keying) RF Power: -23dbm, -6dbm, 0dbm, 6dbm (Modify with AT Command) Speed: 6KB Async, 6KB Sync Service: Central & Peripheral UUID FFE0,FFE1 Power: +3.3VDC 50mA Power: 8.5mA (400uA to 1.5mA in Sleep Mode) Working temperature:–5C to +65C Size: 26.9x13x2.2 (mm)

    10,00 €
    Available
  • 9,60 € Available

    Features:High quality 5v relay. LED status indicator High Current relay, AC250V 10A ; DC30V 10A Perfect for Arduino Projects and more Channels: 8 Product may differ from the picture

    9,60 €
    Available
  • 2,00 € Available

    Specification: Signal Processing; BISS0001IC Voltage: 5V – 20V Power Consumption: 65mA TTL output: 3.3V, 0V Delay time: adjustable (0.3 sec – 10 minutes) Lock time: 0.2 sec Trigger methods: L – disable repeat trigger, H - enable repeat trigger Range: <120 degree, <7 meters Temperature: – 15 ~ +70 Dimension: 32x24 mm

    2,00 €
    Available
  • 3,50 € Available

    Features:High quality 5v relay. LED status indicator High Current relay, AC250V 10A ; DC30V 10A Perfect for Arduino Projects and more Channels: 2 Product may differ from the picture

    3,50 €
    Available
Showing 1 - 18 of 163 items