Information

New products

WiFi There are 9 products.

Showing 1 - 9 of 9 items
  • 17,50 € Available
    New

    SONOFF 2 Channel Smart Home Switch WiFi WiFi protocol: 2.4Ghz b/g/n Frequency: 50Hz / 60Hz Max Load: 220V AC 16A / 3500W Power: 90V - 250V AC Protection: IP20 Material: FR-ABS V0 Wireless Security: WEP/WPA-PSK/WPA2-PSK Control: Mobile App Remote ON/OFF Counter / Time Certifications: CE/RoHS/FCC

    17,50 €
    Available
  • 7,70 € Available

    WiFi Module – ESP-12E USB: micro USB port for power, programming and debugging Headers: 2 x 15p 2.54mm pitch (with access to GPIOs, SPI, UART, ADC, and power pins) Buttons: Reset, Flash Power: 5V Size: 50 x 25 x 14 mm

    7,70 €
    Available
  • 16,00 € 19,00 € Available
    Sale!

    Manufacturer: ESPRESSIF Receiver sensitivity: -98dBm Transmitter output power: 19.5dBm Ciphering: AES, WPA, WPA2-PSK, WPS Supply voltage: 2.2-3.6V DC Communictions protocol: FTP, HTTP, IBM MQTT, IPv4, IPv6, SSL, TCP, UDP Network type: Bluetooth Smart, WiFi Band: 2,412G-2,484GHz GPIO, I2Cx2, I2Sx2, SDIO, SPIx3, UARTx3, USB

    16,00 € 19,00 €
    Available
  • 4,20 € Available
    New

    Compatible with Arduino The ESP8266 Serial/UART to WiFi module is a great way to connect your Arduino or other microcontroller projects to a WiFi network ESP-01 - Serial/UART baud rate = 115200 bps Input power: 3.3V WIFI Wireless Transceiver Module Module size: 24.8mm x 14.3mm LWIP aggrement Support 3 modes: AP,STA,AP+STA High efficiency AT commands,...

    4,20 €
    Available
  • 0,50 € Available

    Pinout for ESP8266 WiFi module. Compatible with ESP-07, ESP-08, ESP-12, ESP-12e. Package includes Breakout PCB Two 1x8 pin headers (not soldered) *The package does not contain the wifi module.

    0,50 €
    Available
  • 7,00 € Available
    Sale!

    WiFi Module – ESP-12E Uses CH340G replace the CP2102 USB: micro USB port for power, programming and debugging Headers: 2 x 15p 2.54mm pitch (with access to GPIOs, SPI, UART, ADC, and power pins) Buttons: Reset, Flash Power: 5V Size: 50 x 25 x 14 mm

    7,00 €
    Available
  • 4,30 € Available

    Description: Model:ESP8266-12 ISM 2.4GHz PA +25dBm 802.11b/g/n 3.3 volt supply for VCC, and 3.3V logic. No 5V. Connect RX or TX on 5V Arduino will destroy this module. You must use a logic level converter, or a 3.3V Arduino The 3.3V supply on the Arduino Uno has inadequate current capabilit to power this module.You must provide a separate,higher 3.3V...

    4,30 €
    Available
  • 6,80 € 8,00 € Available
    Sale!

    Manufacturer: ESPRESSIF Version: ESP-WROOM-32 (4MB) Receiver sensitivity: -98dBm Transmitter output power: 19.5dBm Ciphering: AES, WPA, WPA2-PSK, WPS Supply voltage: 2.2-3.6V DC Communictions protocol: FTP, HTTP, IBM MQTT, IPv4, IPv6, SSL, TCP, UDP Network type: Bluetooth Smart, WiFi Band: 2,412G-2,484GHz GPIO, I2Cx2, I2Sx2, SDIO, SPIx3, UARTx3

    6,80 € 8,00 €
    Available
  • 1,00 € Available

    Pinout for ESP-WROOM-32 Wifi & Bluetooth Module. Compatible with ESP-07, ESP-08, ESP-12, ESP-12e. Package includes Breakout PCB Two 2x9 pin headers (not soldered) *The package does not contain the wifi module.

    1,00 €
    Available
Showing 1 - 9 of 9 items