Information

New products

Connectivity There are 21 products.

per page
Showing 1 - 18 of 21 items
  • 17,50 € Available
    New

    SONOFF 2 Channel Smart Home Switch WiFi WiFi protocol: 2.4Ghz b/g/n Frequency: 50Hz / 60Hz Max Load: 220V AC 16A / 3500W Power: 90V - 250V AC Protection: IP20 Material: FR-ABS V0 Wireless Security: WEP/WPA-PSK/WPA2-PSK Control: Mobile App Remote ON/OFF Counter / Time Certifications: CE/RoHS/FCC

    17,50 €
    Available
  • 17,50 € Available

    U-blox NEO-6M GPS moduleCeramic-Antennabuild-in EEPROMThis module is compatible with APM2 and APM2.5, and EEPROM can save all your configuration data.Interface: RS232 TTLPower: 3-5vBaudrate default:9600bps

    17,50 €
    Available
  • 10,00 € Available

    BT V4.0 BLE Working frequency: 2.4GHz ISM band Modulation method: GFSK(Gaussian Frequency Shift Keying) RF Power: -23dbm, -6dbm, 0dbm, 6dbm (Modify with AT Command) Speed: 6KB Async, 6KB Sync Service: Central & Peripheral UUID FFE0,FFE1 Power: +3.3VDC 50mA Power: 8.5mA (400uA to 1.5mA in Sleep Mode) Working temperature:–5C to +65C Size: 26.9x13x2.2 (mm)

    10,00 €
    Available
  • 7,70 € Available

    WiFi Module – ESP-12E USB: micro USB port for power, programming and debugging Headers: 2 x 15p 2.54mm pitch (with access to GPIOs, SPI, UART, ADC, and power pins) Buttons: Reset, Flash Power: 5V Size: 50 x 25 x 14 mm

    7,70 €
    Available
  • 7,40 € Available
    New

    Input voltage: 3.6-6V Working current: matching for 30 mA, matching the communication for 10 mA Output Power Class: Class 2 Size: 43mm x 15mm

    7,40 €
    Available
  • 16,00 € 19,00 € Available
    Sale!

    Manufacturer: ESPRESSIF Receiver sensitivity: -98dBm Transmitter output power: 19.5dBm Ciphering: AES, WPA, WPA2-PSK, WPS Supply voltage: 2.2-3.6V DC Communictions protocol: FTP, HTTP, IBM MQTT, IPv4, IPv6, SSL, TCP, UDP Network type: Bluetooth Smart, WiFi Band: 2,412G-2,484GHz GPIO, I2Cx2, I2Sx2, SDIO, SPIx3, UARTx3, USB

    16,00 € 19,00 €
    Available
  • 4,20 € Available
    New

    Compatible with Arduino The ESP8266 Serial/UART to WiFi module is a great way to connect your Arduino or other microcontroller projects to a WiFi network ESP-01 - Serial/UART baud rate = 115200 bps Input power: 3.3V WIFI Wireless Transceiver Module Module size: 24.8mm x 14.3mm LWIP aggrement Support 3 modes: AP,STA,AP+STA High efficiency AT commands,...

    4,20 €
    Available
  • 0,50 € Available

    Pinout for ESP8266 WiFi module. Compatible with ESP-07, ESP-08, ESP-12, ESP-12e. Package includes Breakout PCB Two 1x8 pin headers (not soldered) *The package does not contain the wifi module.

    0,50 €
    Available
  • 7,00 € Available
    Sale!

    WiFi Module – ESP-12E Uses CH340G replace the CP2102 USB: micro USB port for power, programming and debugging Headers: 2 x 15p 2.54mm pitch (with access to GPIOs, SPI, UART, ADC, and power pins) Buttons: Reset, Flash Power: 5V Size: 50 x 25 x 14 mm

    7,00 €
    Available
  • 32,00 € 36,00 € Available
    Sale!

    Compatible with 3.3v or 5v I/O Arduino Board. Frequency Band: 915MHz/868 MHZ/433 MHZ (Pre-configure in factory) Low power consumption Compatible with Arduino Leonardo, Uno, Mega, DUE External Antenna via I-Pex connector

    32,00 € 36,00 €
    Available
  • 35,80 € 39,80 € Out of stock
    Sale!

    Innoesys LoRa Shield is an Arduino shield for Low-Power Wide-Area Networks (LPWAN) designed for long range communications with low bitrate. *** Long range: greater than 15 km *** Applications: Internet of Things Sensor networks Agriculture applications Industrial automation Smart city Smart meters Home automation Manufacturer: Innoesys (www.innoesys.com)...

    35,80 € 39,80 €
    Add to cart More
    Out of stock
  • 5,00 € Available

    Current :13-26mA / DC 3.3V Idle Current :10-13mA / DC 3.3V Sleep current: <80uA Peak current: <30mA Operating Frequency: 13.56MHz Supported card types: S50, S70, UltraLight, Pro, Desfire Dimensions: 40mm × 60mm Operating temperature: -20... -80 degrees Celsius Storage temperature: -40... -85 degrees Celsius Humidity: 5% -95% Data Transfer Rate: Max. 10Mbit/s

    5,00 €
    Available
  • 4,30 € Available

    Description: Model:ESP8266-12 ISM 2.4GHz PA +25dBm 802.11b/g/n 3.3 volt supply for VCC, and 3.3V logic. No 5V. Connect RX or TX on 5V Arduino will destroy this module. You must use a logic level converter, or a 3.3V Arduino The 3.3V supply on the Arduino Uno has inadequate current capabilit to power this module.You must provide a separate,higher 3.3V...

    4,30 €
    Available
  • 1,50 € Available

    Pinout for SPBT2632C2A ST bluetooth module. Compatible with breadboards.  Features Manufacturer: Innoesys (www.innoesys.com) Solid Construction Plated Through Holes Easy to solder Dimensions: 28mm x 21mm x 1.6mm Package includes Breakout PCB Two 1x8 pin headers (not soldered) *The package does not contain the bluetooth module.

    1,50 €
    Available
  • 12,50 € Available

    The SparkFun XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). It translates the 5V serial signals to 3.3V so that you can connect a 5V (down to 3.3V) system to any XBee module.

    12,50 €
    Available
  • 18,50 € Out of stock

    Implements CAN V2.0B at up to 1 Mb/s SPI Interface up to 10 MHz Ariduino/ Freaduino Completely compatible Standard (11 bit) and extended (29 bit) data and remote frames Industrial standard 9 pin sub-D connector Two receive buffers with prioritized message storage Operating voltage: DC5-12V Size: 78mmx53.5m *Pin headers are not soldered on the board

    18,50 €
    Add to cart More
    Out of stock
  • 7,00 € Available

    TTL data transparent transfer between a host Bluetooth device.  Coverage: 10m Built in 2.4 antenna.  Power input: 3.3 Dimensions: 44mm x 16mm x 7mm Weight: 8gr Bluetooth version: V2.0+EDR Default Baud Rate: 9600,8,1,n.

    7,00 €
    Available
  • 245,00 € Out of stock

    The iC880A is the RF frontend of a LoRa gateway. It is able to receive on different frequency channels at the same time and is able to demodulate the LoRa signal without knowledge of the used spreading factor of the sending node.

    245,00 €
    Add to cart More
    Out of stock
Showing 1 - 18 of 21 items