NVIDIA Maxwell ™ with 128 processing units Quad-Core-ARM A57 mit 1,43 GHz RAM: 2 GB 64 Bit LPDDR4 25,6 GB/s Data storage: microSD (card not included) Gigabit-Ethernet 802.11ac Wireless Camera: 1x MIPI CSI-2 connection HDMI USB: 1x USB 3.0 Typ A, 2x USB 2.0 Typ A, USB 2.0 Micro-B Size: 100 mm x 80 mm x 29 mm
With over-charging protection and over-discharge protection Micro USB charging interface Charge current: 0.5A 1 switches to control the USB output Input voltage: 5 ~ 8V Three 3V 1A output interface Three 5V 2A output interface LED light, green for full of charge, red for under charging
With this Micro HDMI adapter cable, a Micro HDMI Type D interface can be converted into a standard HDMI Type A connection. Due to the short cable, the device connection is less stressed than with an adapter without a cable.Ideally suited for the Raspberry Pi 4.
The series of modules RF chip SX1278 mainly uses LoRa remote modem for ultra-long distance spread Letter, strong anti-interference, to minimize current consumption. With the help of SEMTECH's LoRa ™Lee modulation technology, SX1278 has a high sensitivity of more than -148dBm, +20dBm power output,Transmission distance, high reliability.
Chipset: ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor FLASH: QSPI flash 4MB / PSRAM 8MB SRAM: 520 kB SRAM Button: Reset USB to TTL: CP2104 On-board clock: 40MHz crystal oscillator Working voltage: 2.7V-3.6V Working current: About 70mA Sleep current: About 300uA SIM card: Only supports Nano SIM card
LoRa ™ Spread Spectrum modulation technology Constant RF power output at + 20dBm-100mW voltage change High sensitivity: down to -148dBm Half-duplex SPI communication 127dB RSSI dynamic range Automatic RF signal detection, CAD mode and very high speed AFC Packet engine with CRC up to 256 bytes Small footprint dual-row stamp-hole patch package Spring Antenna
The 868/915MHz antenna needs to be in connection with the IPEX interface (if the antenna is not connected, it may damage the LoRa chip). When using, pay attention to the positive and negative of the battery, otherwise it will be damaged!With IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor to this pin!
The Ra-02 LoRa module is made by Ai-Thinker company, the manufacturer of the ESP32S module, the module uses SX1278 IC, works on 433MHz frequency. It is a high quality made module. The dimension is very small, only 17 x 16 mm, with all the SX1278 pins breakout.
E32-868T20D is a 100 mW wireless transceiver module with LoRa spread-spectrum technology, operates at 862~893MHz (Default: 868MHz), based on originally imported RFIC SX1276 from SEMTECH, transparent transmission is available, TTL level.
Digital Load Cell Weight Sensor 20kg Four leads, the use of simple, 5-10V drive voltage, the force changes directly to the output voltage signal. Green: output signal + White: Output signal - Wiring method: red: power + Black: Power -
This kit walks you through the basics in a hands-on way, with creative projects you build by learning, thanks to a selection of the most common and useful electronic components with a selection of 15 projects that start from a low complexity, in order to let you learn the basic of electronic * KOREAN VERSION *
The LoRa/GPS Shield is an expension board for LoRa™/GPS for using with the Arduino.This product is intended for those interested in developing LoRa™/GPS solutions.The LoRa/GPS Shield is composed of LoRa/GPS Shield mother board and LoRa BEE.
Manufacturer: Baseus Model: Mirror Travel Product code: CCALL-BH02 Material: ABS + PC polycarbonate Quick Charging: 3.4A USB1 Output: 5V=1A USB2/USB3 Output: 5V=2.4A Input voltage: AC 100-240V 50/60Hz 0.5A MAX Color: White
Frequency Band: 868 MHZ/433 MHZ/915 MHZ(Pre-configure in factory) LoRa™ Modem FSK, GFSK, MSK, GMSK, LoRa™and OOK modulation Bee form factory Package Includes: 1 x Lora Bee 1 x Glue Stick Antenna(868 MHZ, 433 MHZ or 915 MHZ depends on order) Environmental protection paper box
Output Current: 1.5A (minimum), 2.2A ( typical value ) Working temperature : -55 ° C to + 150 ° C Adjustable output voltage range : 1.2 ~ 37V Current output : 1.5A Voltage Input : 4.2 ~ 40 V Operating temperature : 0 ° C ~ 125 ° C Module size : 35.6mm x 16.8mm
The Neo Flex protective film is made of maximally flexible TPU, so curves are not a problem for it. Installation is trivial, due to the fact that the coating is installed wet, we do not have to worry about air bubbles or uneven installation. The film is transparent, perfectly reflects the displayed colours and does not affect the touch sensitivity
Extremely convenient and easy to use 4-port USB HUB with support for USB 3.0 and USB 2.0. Colour: white Producer: Baseus Additional power Supply through microUSB Input: 1x USB 3.0 Output USB ports number: 4 szt. Connector: 3x USB 2.0, 1x USB 3.0 Output port type: 4x USB
Specifications: THT Mounting Color RED 5mm Operating Voltage 1.8-2.4V
Nut shape: Hexagonal Thread: M3 Height: 2.4mm Spanner size: 5.5mm Color: Silver
Manufacturer: SAMSUNG Rechargeable battery type: Li-Ion Battery size: MR18650 Rated voltage: 3.6V-3.7V Capacity: 3500mAh Body dimensions: Ø18.55 x 65.25mm Max Current: 13A Unprotected Flat top (Price for one piece)
Nut shape: Hexagonal Thread: M2 Height: 1.6mm Spanner size: 4mm Color: Silver
Manufacturer: SONY / MURATA Rechargeable battery type: Li-Ion Battery size: MR18650 Rated voltage: 3.6V - 3.7V Capacity: 3120mAh Body dimensions: Ø18.2 x 650mm Max Current: 30A Unprotected Flat top
Specifications: THT Mounting Color GREEN 5mm Operating Voltage 2.2-2.5V
Brand: Panasonic Type: Lithium Voltage: 3V Capacity: 1550mAh Dimensions: 17 Ø x 34.5 mm Applications: Photo cameras, wireless sensors, measuring equipment The CR123A is a powerful lithium battery with low self-discharge. This battery is characterized by a constant voltage output and is functional at temperatures from -40 to +60 ° C.
Specifications: THT Mounting Color WHITE 5mm Operating Voltage 2.8-3.4V
Specifications: THT Mounting Color YELLOW 5mm Operating Voltage 1.8-2.6V
Manufacturer: SAMSUNG Rechargeable battery type: Li-Ion Battery size: MR18650 Rated voltage: 3.6V Capacity: 3000mAh Body dimensions: Ø18.3 x 64.9mm Max Current: 15A Unprotected Flat top
Manufacturer: Saft Type: Lithium Thionyl Chloride Size: AA/2, ER14250 Wide operating temperature range of -60ﾟC to +85ﾟC Long Shelf Life Compliant with IEC 60086-4 safety standard Note: Due to the high terminal voltage (3.6V), they are not suitable as direct replacements for other battery technologies in the same can sizes.
The case is made of ABS material. Size: 9.5cmx6.2cmx2.7cm Color: transparent
This is a small breadboard (4,6x3,6 cm) with 170 tie points. It is self-adhesive and compatible with the Arduino Proto Shield. • 170 tie point breadboard - Black• 17 x 5 x 2 points• ABS plastic material• Completely reusable• Coordinates for easy component placement• Phosphor bronze nickel plated spring clips• Accepts a variety of wire sizes (20-29 AWG)•...
WiFi Module – ESP-12E Uses CH340G replace the CP2102 USB: micro USB port for power, programming and debugging Headers: 2 x 15p 2.54mm pitch (with access to GPIOs, SPI, UART, ADC, and power pins) Buttons: Reset, Flash Power: 5V Size: 50 x 25 x 14 mm
DC Voltage: 2.5 - 6V Working Current: 130 - 220mA Power: 0.4 - 1.5W Maximum Lift: 40 - 110cm Flow Rate: 80 - 120l/h Outside diameter of water outlet: approx. 7.5mm Inside diameter of water outlet: approx 4.7mm Size (Diameter x Lenght x Height): approx. 24mm x 45mm x 33mm Wire Length: apro. 15 - 20cm Material: Plastic Continuous Working Life: 500 hours
The Arduino Uno Rev3 is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
Manufacturer: ESPRESSIF Receiver sensitivity: -98dBm Transmitter output power: 19.5dBm Ciphering: AES, WPA, WPA2-PSK, WPS Supply voltage: 2.2-3.6V DC Communictions protocol: FTP, HTTP, IBM MQTT, IPv4, IPv6, SSL, TCP, UDP Network type: Bluetooth Smart, WiFi Band: 2,412G-2,484GHz GPIO, I2Cx2, I2Sx2, SDIO, SPIx3, UARTx3, USB
This is a simple moisture sensor can be used to detect soil moisture. Using the sensor produces an automatically watering device. Adjustable sensitivity Working voltage : 3.3 V -- 5 V Double output mode Power indicator light (red) Digital switch output indicator light (green)
The Wireless Proto shield allows an Arduino board to communicate wirelessly using a wireless Xbee module from Digi. It can also use any module with the same footprint. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight).
Orders placed till 14:00 (Greece time zone) will be shipped the same day (not for Saturdays)
Feel free to contact us on this number +30 210 54 47 472 from Monday to Friday 10:00 - 19:00 and Saturday 10:00 - 15:00 (Greece time zone)
Use your account on PayPal or use PayPal Express Checkout for fast & secure payment.
"We are what we repeatedly do. Excellence, then, is not an act, but a habit." Aristotle, Philosopheru
We have implemented lots of innovative projects for industrial and academic purposes. We have more than 10 years of experience in coding and hardware implementations. We decided to help others to do the same.
We promise that we will our best to provide you the best service, support and prices. We are working hard to meet your expectations.