Κανένα προϊόν
Οι τιμές είναι μετά φόρων
Πρέσα ακροδεκτών Ugreen, κατασκευασμένη με έμφαση στην άνετη χρήση Η...
Brand: Ugreen Materials: nickel + copper Connector type: RJ45 Quantity...
This is an edge connector expansion board designed for micro:bit,...
Dimension : 40mm x 19mm x 43mm Weight : 55g Operating Speed : 0.17sec /...
Power supply: 5V (POWER connector) OR 6V~12V (VIN terminal) Servo...
Brand: Ugreen Model: MU006 Mouse type : wireless Sensor type : optical...
Brand: Ugreen Model: LP230 Compatibility: with laptops from 11'' to...
DC: 200mV/2V/20V/200V/600V AC: 20V/200V/600V Ρεύμα DC: 20mA/200mA...
Battery Capacity: 10000mAh 3.7V Battery energy: 37Wh Battery type:...
ΓΙΑ ΠΡΟΣΦΟΡΑ ΣΕΤ ΑΑ και ΑΑΑ ΔΕΙΤΕ ΕΔΩ Maxell Αλκαλικές Μπαταρίες LR6...
Color: Grey Thermal Conductivity: >5.15 Thermal impedance: <0.004...
Τύπος: Αλκαλική μπαταρία Τάση [V]: 9 Συσκευασία: Blister 1 pc Συμβατές...
A single module can drive a 8x8 dot matrix common cathode Working...
Filament type: PET-G Colour: Super Blue Transparent Printing...
Filament type: PET-G Colour: Light Gray Printing temperature: 220-250°C...
Filament type: PET-G Colour: Graphite Printing temperature: 220-250°C...
Filament type: PET-G Colour: Galaxy Gray Printing temperature:...
Filament type: PLA Colour: Bright Green Printing temperature: 200-235°C...
Χρώμα: διαφανές Πυκνότητα στους 20° C: 0,79 g / cm3 Σημείο ανάφλεξης: 12...
Ιδανικό για χειροκίνητη επικασσιτέρωση για την αποκατάσταση της...
Υποκατηγορίες
CY8CKIT-142 PSoC 4 BLE Module is certified, easy-to-use solution for designing complete Bluetooth® Low Energy systems.
The Ra-02 LoRa module is made by Ai-Thinker company, the manufacturer of the ESP32S module, the module uses SX1278 IC, works on 433MHz frequency. It is a high quality made module. The dimension is very small, only 17 x 16 mm, with all the SX1278 pins breakout.
Made from precision-cut aluminium alloy The aluminium body naturally dissipates heat from all directions The tough anodised aluminium body is perfect for keeping your Raspberry Pi safe Assembly is quick and easy, with just 4 sections to fit together
Manufacturer: SANDISK Type: SD HC Micro Storage Capacity: 128GB Speed Class: Class 10 Suitable for iPad, Tablet, Cellular, Digital Camera, GPS, Mp3, Raspberry etc.
MPU-9250 9DOF GY-9250 Module Nine-axis (Altitude, Gyro, Accelerator, Magnetometer) Power: 3-5v (internal low dropout regulator) Standard IIC / SPI protocol 16bit AD converter-chip 16-bit data output Gyro range: ± 250 500 1000 2000 ° / s Acceleration range: ± 2 ± 4 ± 8 ± 16g Magnetic field range: ± 4800uT Pitch: 2.54mm Module size 15 x 25mm
Useful for prototyping/projects. Invensense MPU-6050 6-Axis (Gyro & Accelerometer) Very useful in prototyping systems Jumper Configurable 1x10 pin header Power supply configurable (5V or 3.3V) I2C Pull-up resistors Includes pin header & jumpers Manufacturer: Innoesys (www.innoesys.com) ** For Detailed information refer to the datasheet below
Manufacturer: ESPRESSIF Receiver sensitivity: -98dBm Transmitter output power: 19.5dBm Ciphering: AES, WPA, WPA2-PSK, WPS Supply voltage: 2.2-3.6V DC Communictions protocol: FTP, HTTP, IBM MQTT, IPv4, IPv6, SSL, TCP, UDP Network type: Bluetooth Smart, WiFi Band: 2,412G-2,484GHz GPIO, I2Cx2, I2Sx2, SDIO, SPIx3, UARTx3, USB
The Raspberry Pi Zero is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough for any project! 1GHz single-core CPU 512MB RAM Mini HDMI port Micro USB OTG port Micro USB power HAT-compatible 40-pin header Composite video and reset headers CSI camera connector (v1.3 only)
The SparkFun XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). It translates the 5V serial signals to 3.3V so that you can connect a 5V (down to 3.3V) system to any XBee module.
The MSP-EXP430G2 low-cost experimenter board called LaunchPad is a complete development solution Manufacturer: Texas Instruments Tool Is For Evaluation Of: MSP430G2xx, MSP430F20xx Core: MSP430 Data Bus Width: 16 bit Interface Type: USB
The Wireless Proto shield allows an Arduino board to communicate wirelessly using a wireless Xbee module from Digi. It can also use any module with the same footprint. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight).
Beginners Kit for your first Arduino project/tutorial. See the details below. 1 x 10K Potentiometer 10 x LED Red 10 x LED Green Resistors: 20 x 220R, 10 x 10K, 10 x 100R 1 x Pushbutton 1 x Hook-up wires 65pack 1 x Breadboard half-size 400 1 x Buzzer 3 x Photoresistor 1 x LED RGBs 1 x Ultrasonic Range Finder 1 x USB Type A to B cable 1 x 9V Battery snap 1...
The Arduino Mini is a small microcontroller board intended for use on breadboards and when space is at a premium. The revision 05 has a new package for the ATmega328 (datasheet), which enables all components to be on the top of the board. It also has an onboard reset button. The 05 version has the same pin configuration as revision 04.
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features.
Omron 5V solid state relay 240V 2A output with a resistive fuse 240V 2A. input power: 5V DC (160MA) input control signal voltage: (0-2.5V status low level relay ON), (3.3-5V status high relay OFF) 8 Channel (Relay)
5MP sensor, 2592x1944 pixels 1080p video at 30 FPS (or 60 FPS at 720p, 90 FPS at 480p) Approx. dimensions of circuit and camera: 60 x 11.4 x 5.1mm Only for Raspberry Pi Zero or Zero W with CSI camera port Raspberry Pi Zero not included
Designed specifically for the needs of the Raspberry Pi 4 Model B Made with aluminum alloy and polished with a modern Space Grey finish for stunning aesthetics Acts as passive cooling Easy assembling With magnetic top to keep the ports safe when not in use
SpecificationAtmel Atmega2560 microcontroller Digital I/O ports: 54 Analog I/O ports: 16 Supports ISP download function Input voltage: When connected with PC USB, there is no need for external power source; for external power source: 6V~12V DC voltage input.