Κανένα προϊόν
Οι τιμές είναι μετά φόρων
Maxell Αλκαλικές Μπαταρίες LR03 size AAA (32τμχ) 1.5V Συσκευασία 32...
Maxell Αλκαλικές Μπαταρίες LR6 size AA (32τμχ) 1.5V Συσκευασία 32 τεμαχίων
DS18B20 temperature sensor 9 to 12 bit adjustable resolution 1-Wire...
DS18B20 temperature sensor 9 to 12 bit adjustable resolution 1-Wire...
Suitable for Raspberry Pi, Smartphones, Tablets etc. Color: White Type:...
Reinforced, braided cable braid Quick Charge: 2A (max) Features: fast...
The perfect home for your new Raspberry Pi 4. We will ensure our case is...
Touchscreen Display Dimensions: 194mm x 110mm x 20mm Viewable screen...
Manufacturer: RAYEX ELECTRONIC Relay type: electromagnetic Contacts...
Patch Cord, 8P8C Outer Diameter: 5.0mm Length: 2m Cat 5e Color: Red
Χειρουργική Μασκα μιας χρήσης 17.5cm x 9.5cm STANDARD: YY/T 0969-2016...
Type of transistor: NPN Polarisation: bipolar Collector-emitter voltage:...
Gyroscope – angular rate sensor: +/-245/500/2000dps Accelerometer -...
Integrated circuit type: voltage stabiliser Kind of voltage regulator: fixed Output voltage: 9V Output current: 1.5A Case: TO220 Mounting: THT
Manufacturer: LITEON Type of semiconductor component: optocoupler Mounting: THT Number of channels: 1 Kind of output: transistor Insulation voltage: 2.5kV Collector-emitter voltage: 30V Case: DIP6 Turn-on time: 3µs Turn-off time: 3µs
The MDU1512 uses advanced MagnaChip’s MOSFET Technology, which provides high performance in on-state resistance, fast switching performance and excellent quality. MDU1512 is suitable device for DC to DC converter and general purpose applications.
BQ738 BQ24738 QFN20 IC Chip
Manufacturer: ST MICROELECTRONICS Integrated circuit type: voltage stabiliser Kind of voltage regulator: fixed Output voltage: 5V Output current: 1.5A Case: TO220 Mounting: THT
Applications Stepper Motor Drivers DC Motor Drivers Latching Relay Drivers Features Wide Supply-Voltage Range: 4.5 V to 36 V Separate Input-Logic Supply Internal ESD Protection High-Noise-Immunity Inputs Output Current 1 A Per Channel Peak Output Current 2 A Per Channel Output Clamp Diodes for Inductive Transient Suppression
ATMega328 32K microcontroller with pre-loaded Arduino UNO bootloader AVR microcontroller Flash memory organisation: 32kx8bit EEPROM memory capacity: 1024B SRAM memory capacity: 2048B Case: DIP28 Clock frequency: 20MHz Mounting: THT Operating voltage: 1.8...5.5V ** For Detailed information refer to the datasheet below
Manufacturer: ATMEL Integrated circuit type: AVR microcontroller Flash memory: 16kx8bit EEPROM: 512B SRAM: 1024B Case: TQFP44 Clock frequency: 8MHz Peripherial: RTC, comparator No of inputs/outputs: 32 No of PWM channels: 4 No of 8-bit timers: 1 Mounting: SMD Operating voltage: 2.7 - 5.5V Number of 10-bit ADCs: 8
The SN76489 is a TTL-compatible, 4-channel Programmable Sound Generator (PSG) IC from Texas Instruments. Its main application has been entertainment and it has been used to provide music and sound effects in Game consoles, arcade hardware and home computers. Three programmable square wave tone generators One programmable white noise generator Programmable...
Manufacturer: ST MICROELECTRONICS Integrated circuit type: voltage stabiliser Kind of voltage regulator: fixed Output voltage: 5V Output current: 0.1A Case: TO92 Mounting: THT ** For Detailed information refer to the datasheet below
The ATmega48A/PA/88A/PA/168A/PA/328/P is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. AVR microcontroller Flash memory organisation: 32kx8bit EEPROM memory capacity: 1024B SRAM memory capacity: 2048B Case: DIP28 Clock frequency: 20MHz Mounting: THT Operating voltage: 1.8...5.5V ** For Detailed information refer to...
The SNx4HC595 devices contain an 8-bit, serial-in, parallel-out shift register that feeds an 8-bit D-typestorage register. The storage register has parallel 3-state outputs. Separate clocks are provided for both the shift and storage register. The shift register has adirect overriding clear (SRCLR) input, serial (SER) input, and serial outputs for cascading.
The SN754410 is a handy IC that allows you to control the speed and direction of a DC motor with only one PWM output and two digital outputs from your Arduino board.