Κανένα προϊόν
Οι τιμές είναι μετά φόρων
Filament type: PET-G Colour: Super Blue Transparent Printing...
Filament type: PET-G Colour: Light Gray Printing temperature: 220-250°C...
Filament type: PET-G Colour: Graphite Printing temperature: 220-250°C...
Filament type: PET-G Colour: Galaxy Gray Printing temperature:...
Filament type: PLA Colour: Bright Green Printing temperature: 200-235°C...
Χρώμα: διαφανές Πυκνότητα στους 20° C: 0,79 g / cm3 Σημείο ανάφλεξης: 12...
Ιδανικό για χειροκίνητη επικασσιτέρωση για την αποκατάσταση της...
STM32G071RBT6 microcontroller in LQFP64 package 32.768 kHz crystal...
Κατασκευαστής: Nextool Μοντέλο: NE0126 Φωτεινότητα: έως 2000lm Χρόνος...
Τύπος: Mπαταρία λιθίου Κατηγορία: CR2032 Τάση μπαταρίας: 3V Συσκευασία:...
Παρασκευή που περιέχει υψηλής καθαρότητας ισοπροπυλική αλκοόλη που...
Εργονομικός σχεδιασμός για άνετη χρήση Οπτικός σένσορας ανάλυσης...
Σύνδεση: Ασύρματη 2.4GHz Εμβέλεια: έως 10m Ανάλυση: 800/1200/1600 dpi...
Speaker size: 14.2mm Sensitivity: 91dB ± 3dB Frequency range:...
Συνδεσιμότητα: Bluetooth v5.0, mini-jack 3,5mm, Ασύρματο, Ενσύρματο...
Total power output:RMS 24W Frequency response:70 HZ-20 KHZ +/-9db Signal...
Producer: Rebeltec Model: Long+ Width: 780 mm Length: 300 mm Thickness:...
Producer: Rebeltec Model: SliderM+ Width: 350 mm Length: 250 mm...
Producer: Rebeltec Model: SliderS+ Width: 250 mm Length: 200 mm...
Gaming USB Sound Card Chipset: CM108B 2.0 Cable length: 1.2m Wire...
TrueWireless Stereo Plus for easier pairing and better connectivity Up...
TrueWireless Stereo Plus for easier pairing and better connectivity Up...
Reinforced, braided cable braid Quick Charge: 1.5A (max) Features: fast...
iPhone 14 Pro Max Protect phone screen Resistant to scratches and...
iPhone 14 Pro Protect phone screen Resistant to scratches and absorbs...
iPhone 14 Plus Protect phone screen Resistant to scratches and absorbs...
iPhone 14 Protect phone screen Resistant to scratches and absorbs...
iPhone 13 / 13 Pro Protect phone screen Resistant to scratches and...
iPhone 13 Pro Max Protect phone screen Resistant to scratches and...
iPhone 13 Mini Protect phone screen Resistant to scratches and absorbs...
Compatibility: USB v2.0 standard Serial:RS-485 Serial: Screw terminal...
The onboard MAX485 chip is a low power consumption, limited swing rate...
1 x Insulating ring (washer) Protects the battery from unwanted short circuits on the front side Temperature-resistant up to 150 °C One-sided self-adhesive Diameter (outer): 17mm Diameter (inner): 7mm Thickness: 0.3 mm
For unprotected 18650 cells Attach an additional heat shrink tubing or replace an already worn/torn Do not overheat the battery Tubing shrink at 80 °C 18.12 x 70 mm White Pull the shrink tubing over the cell so that the cell is in the center of the shrink tubingShrink the tube at the positive pole and then at the negative poleThen shrink the body of the...
For unprotected 18650 cells Attach an additional heat shrink tubing or replace an already worn/torn Do not overheat the battery Tubing shrink at 80 °C 18.12 x 70 mm Black Pull the shrink tubing over the cell so that the cell is in the center of the shrink tubingShrink the tube at the positive pole and then at the negative poleThen shrink the body of the...
For unprotected 18650 cells Attach an additional heat shrink tubing or replace an already worn/torn Do not overheat the battery Tubing shrink at 80 °C 18.12 x 70 mm Minion Pull the shrink tubing over the cell so that the cell is in the center of the shrink tubingShrink the tube at the positive pole and then at the negative poleThen shrink the body of the...
For unprotected 18650 cells Attach an additional heat shrink tubing or replace an already worn/torn Do not overheat the battery Tubing shrink at 80 °C 18.12 x 70 mm StarWars (Price for one piece) Pull the shrink tubing over the cell so that the cell is in the center of the shrink tubingShrink the tube at the positive pole and then at the negative poleThen...
For unprotected 18650 cells Attach an additional heat shrink tubing or replace an already worn Do not overheat the battery Tubing shrink at 80 °C 18.12 x 70 mm AngryBirds (Price for one piece) Pull the shrink tubing over the cell so that the cell is in the center of the shrink tubingShrink the tube at the positive pole and then at the negative poleThen...
For unprotected 18650 cells Attach an additional heat shrink tubing or replace an already worn Do not overheat the battery Tubing shrink at 80 °C 18.12 x 70 mm AngryBirds (Price for one piece) Pull the shrink tubing over the cell so that the cell is in the center of the shrink tubingShrink the tube at the positive pole and then at the negative poleThen...
For unprotected 18650 cells Attach an additional heat shrink tubing or replace an already worn Do not overheat the battery Tubing shrink at 80 °C 18.12 x 70 mm AngryBirds (Price for one piece) Pull the shrink tubing over the cell so that the cell is in the center of the shrink tubingShrink the tube at the positive pole and then at the negative poleThen...