Breakout Υπάρχουν 6 προϊόντα.

• 

  1,40 € Διαθέσιμο

  Tiny RTC Module DS1307 (for Arduino)

  DS1307 I2C real time clock chip (RTC) 24C32 32K I2C EEPROM memory Compact design, 27mm * 28mm * 8.4mm Fully charged, can provide DS1307 timing 1 year. Perfect for Arduino Projects and more Two-wire serial interface *No Battery Included

  1,40 €

  Προσθήκη στο καλάθι Περισσότερα

  Διαθέσιμο
• 

  3,60 € Διαθέσιμο

  USB to TTL FTDI FT232 Serial Breakout

  Chip: FT232RL Draw out all signal port of FT232RL chip RXD / TXD transceiver communication indicator USB power supply, can choose 5V or 3.3V, set by jumper With over current protection, using 500mA self-restore fuse Pin definition: DTR, RXD, TX, VCC, CTS, GND Pitch: 2.54mm Size: 36 x 18mm (L x W) Interface: Mini USB

  3,60 €

  Προσθήκη στο καλάθι Περισσότερα

  Διαθέσιμο
• 

  2,00 € Διαθέσιμο

  MicroSD Module with SPI interface (for...

  Supports Micro SD cards, Micro SDHC card (high speed card) Level conversion circuit board that interfaces level for 5V or 3.3VPower supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit boardStandard communication interface SPI interface Perfect for Arduino Projects and more 4xM2 screw positioning holes for easy installation

  2,00 €

  Προσθήκη στο καλάθι Περισσότερα

  Διαθέσιμο
• 

  3,00 € Διαθέσιμο

  USB to TTL CH340 Serial Breakout

  CH340G chip Golden appearance Upscale yellow pin Power light PWR TXD and RXD LEDs Reserved RTS, CTS 3V3 and 5V by jumper selection Package include: 1 x CH340G Module  4 x Female to Female Dupot Jumper Wire

  3,00 €

  Προσθήκη στο καλάθι Περισσότερα

  Διαθέσιμο
• 

  1,20 € Διαθέσιμο

  MAX3232 RS232 to TTL Serial Module DB9...

  Chip: MAX232 RXD / TXD transceiver communication indicator Connector: DB9 Size: aprox. 32mm x 32mm x 16mm Interface: VCC. RXD, TXD, GND

  1,20 €

  Προσθήκη στο καλάθι Περισσότερα

  Διαθέσιμο
• 

  1,00 € Διαθέσιμο

  Νέο

  I2C Logic Level Converter Bi-Directional...

  The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the HV' pin, low voltage (3.3V for example) to LV', and ground from the system to the GND' pin. Dimensions:0.63 x 0.52" (16.05 x 13.33mm)

  1,00 €

  Προσθήκη στο καλάθι Περισσότερα

  Διαθέσιμο