Arduino / Genuino Υπάρχουν 152 προϊόντα.

• 

  0,20 € Available

  Photoresistor GL5528 LDR

  Photoresistor is a resistor which made of semi-conductor material,and the conductance changes with luminance variation . The photoresistor can be manufactured with different figures and illuminated area based on this characteristic. Model: GL5528 Max Voltage (DC): 150V Max Power Consumption: 100mW Photo resistance : 20k Ohm Dark resistance : 1M Ohm

  0,20 €

  Προσθήκη στο καλάθι Περισσότερα

  Available
• 

  0,40 € Εξαντλημένο

  USB Cable Type A to B (small)

  Suitable for Arduino and other devices (like printers) Type A Male Connector Type B Male Connector Color may differ (usually blue) Length 25-35cm

  0,40 €

  Προσθήκη στο καλάθι Περισσότερα

  Εξαντλημένο
• 

  9,50 € Available

  Νέο

  LCD 20x4 with IIC/I2C/TWI SPI, Blue...

  Type: Character Display 4-lines X 20-characters Blue Backlight High Contrast Standard HD44780 equivalent LCD controller Operatation Voltage: 5V DC

  9,50 €

  Προσθήκη στο καλάθι Περισσότερα

  Available
• 

  0,30 € Available

  Arduino Header Stackable 1x6p 14.5mm

  Original Arduino Stackable Header 1x6p These headers are made to work with the Arduino UNO R3, Leonardo and new Arduino boards going forward. They are the perfect height for clearing the USB-B connector and great for stacking multiple shields.  Pins: 6 Height: 14.5mm Color: Black Enforced Pins Part No: A000085

  0,30 €

  Προσθήκη στο καλάθι Περισσότερα

  Available
• 

  0,30 € Available

  Arduino Header Stackable 1x8p 14.5mm

  Original Arduino Stackable Header 1x8p These headers are made to work with the Arduino UNO R3, Leonardo and new Arduino boards going forward. They are the perfect height for clearing the USB-B connector and great for stacking multiple shields.  Pins: 8 Height: 14.5mm Color: Black Enforced Pins Part No: A000085

  0,30 €

  Προσθήκη στο καλάθι Περισσότερα

  Available
• 

  0,35 € Available

  Arduino Header Stackable 1x10p 14.5mm

  Original Arduino Stackable Header 1x8p These headers are made to work with the Arduino UNO R3, Leonardo and new Arduino boards going forward. They are the perfect height for clearing the USB-B connector and great for stacking multiple shields.  Pins: 10 Height: 14.5mm Color: Black Enforced Pins Part No: A000084

  0,35 €

  Προσθήκη στο καλάθι Περισσότερα

  Available
• 

  0,80 € Εξαντλημένο

  L293D H-Bridge

  Applications Stepper Motor Drivers DC Motor Drivers Latching Relay Drivers Features Wide Supply-Voltage Range: 4.5 V to 36 V Separate Input-Logic Supply Internal ESD Protection High-Noise-Immunity Inputs Output Current 1 A Per Channel Peak Output Current 2 A Per Channel Output Clamp Diodes for Inductive Transient Suppression

  0,80 €

  Προσθήκη στο καλάθι Περισσότερα

  Εξαντλημένο
• 

  7,00 € 8,40 € Available

  Προσφορά!

  Compatible Arduino UNO R3 ATmega328P + USB...

  Microcontroller:ATmega328P Digital I/O port: 0~13 Analog I/O port: 0~5 Supports ISP download function Input voltage: When connected with PC USB, there is no need for external power source; for external power source: 5V-9V DC voltage input. Output voltage: 5V DC and 3.3V DC. *Pin strip an usb cable are included in the package

  7,00 € 8,40 €

  Προσθήκη στο καλάθι Περισσότερα

  Available
• 

  1,50 € Available

  TCRT5000 Infrared Sensor Module - Line Track

  TCRT5000 IR reflex sensors Stable LM393 chipset in comparator Digital potentiometer for sensibility adjustment Clean comparator output signal Fixed bolt hole for easy installation Detection Range:  1mm to 25 mm Focus Range: 2.5 mm Driving Ability: > 15 mA Working Voltage: 3.3 V to 5 V Output: digital switch outputs (0 and 1) PCB Size: 3.2 x 1.4 cm

  1,50 €

  Προσθήκη στο καλάθι Περισσότερα

  Available
• 

  2,50 € Available

  Photo Interrupter - Car Speed Sensor

  Ιntelligent car speed measurement module Photoelectric Output 5V, TTL level

  2,50 €

  Προσθήκη στο καλάθι Περισσότερα

  Available
• 

  12,50 € Available

  SparkFun XBee Explorer WRL-11373

  The SparkFun XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). It translates the 5V serial signals to 3.3V so that you can connect a 5V (down to 3.3V) system to any XBee module.

  12,50 €

  Προσθήκη στο καλάθι Περισσότερα

  Available
• 

  32,00 € Available

  Innoesys 4 DAC Shield for Arduino

  Microchip MCP4728 12-bit Quad channel DAC 4 analogue buffered or un-buffered outputs Voltage gain using potentiometer Jumper Configurable Voltage amplifier with external power source up to 26V Manufacturer: Innoesys (www.innoesys.com) ** For detailed information refer to the datasheet below

  32,00 €

  Προσθήκη στο καλάθι Περισσότερα

  Available
• 

  3,20 € Available

  Film Strain Gauge 120R 9x4mm

  Model: BX120-4AA Size: 9mmx4mm With 4cm silver plated copper wire Suitable temperature: -30...70°C Sensitivity coefficient and dispresion: 2.1 +/-2% Connection: solder pads Resistance: 120R Origin: CHINA *with soldered leads

  3,20 €

  Προσθήκη στο καλάθι Περισσότερα

  Available
• 

  0,70 € Εξαντλημένο

  Transparent Bracket for Ultrasonic HC-SR04

  Bracket ultrasonic sensor bracket fixture intelligent car supporting height adjustable Screws and nuts are included

  0,70 €

  Προσθήκη στο καλάθι Περισσότερα

  Εξαντλημένο
• 

  2,80 € Available

  Flame Detection Sensor (for Arduino)

  Module Features:  Detection: Fire / Flame Light Source Wavelength: 760nm to 1100nm Detection angle: 60 degrees Sensitivity: Adjustable by potentiometer Operating Voltage 3.3V-5V  Output: Digital & Analog PCB size: 3.2cmx1.4cm  fixed bolt holes for easy installation 

  2,80 €

  Προσθήκη στο καλάθι Περισσότερα

  Available
• 

  1,50 € Available

  Sound Detection Module - Mic Sensor KY-037

  Mounting screw hole 3mm Power: 5v DC Analog output Threshold level output flip High sensitive microphone Power indicator light

  1,50 €

  Προσθήκη στο καλάθι Περισσότερα

  Available
• 

  16,00 € 18,60 € Available

  Προσφορά!

  Innoesys Educational Shield for Arduino

  Innoesys Educational Shield is an Arduino UNO shield that has all the necessary components and sensors on it, for the beginner to start programming Temperature Sensoor Potentiometer Photo Sensor Relay Servo Motor Support ON-OFF Switch Buzzer 3 x LEDs (Red, Green, Blue) 5 x Pushbuttons Manufacturer: Innoesys (www.innoesys.com) For detailed information and...

  16,00 € 18,60 €

  Προσθήκη στο καλάθι Περισσότερα

  Available
• 

  5,40 € Available

  Νέο

  LCD 16x2 with IIC/I2C/TWI SPI, Blue Backlight

  Type: Character Display with IIC/I2C/TWI SPI module 2-lines X 16-characters Blue Backlight High Contrast Operation Voltage: 5V DC Module dimension: 80 x 57 x 21mm Large viewing angle suitable for Arduino Uno, Mega contrast adjustable via potentiometer

  5,40 €

  Προσθήκη στο καλάθι Περισσότερα

  Available