Κανένα προϊόν
Οι τιμές είναι μετά φόρων
Filament type: PET-G Colour: Super Blue Transparent Printing...
Filament type: PET-G Colour: Light Gray Printing temperature: 220-250°C...
Filament type: PET-G Colour: Graphite Printing temperature: 220-250°C...
Filament type: PET-G Colour: Galaxy Gray Printing temperature:...
Filament type: PLA Colour: Bright Green Printing temperature: 200-235°C...
Χρώμα: διαφανές Πυκνότητα στους 20° C: 0,79 g / cm3 Σημείο ανάφλεξης: 12...
Ιδανικό για χειροκίνητη επικασσιτέρωση για την αποκατάσταση της...
STM32G071RBT6 microcontroller in LQFP64 package 32.768 kHz crystal...
Κατασκευαστής: Nextool Μοντέλο: NE0126 Φωτεινότητα: έως 2000lm Χρόνος...
Τύπος: Mπαταρία λιθίου Κατηγορία: CR2032 Τάση μπαταρίας: 3V Συσκευασία:...
Παρασκευή που περιέχει υψηλής καθαρότητας ισοπροπυλική αλκοόλη που...
Εργονομικός σχεδιασμός για άνετη χρήση Οπτικός σένσορας ανάλυσης...
Σύνδεση: Ασύρματη 2.4GHz Εμβέλεια: έως 10m Ανάλυση: 800/1200/1600 dpi...
Speaker size: 14.2mm Sensitivity: 91dB ± 3dB Frequency range:...
Συνδεσιμότητα: Bluetooth v5.0, mini-jack 3,5mm, Ασύρματο, Ενσύρματο...
Total power output:RMS 24W Frequency response:70 HZ-20 KHZ +/-9db Signal...
Producer: Rebeltec Model: Long+ Width: 780 mm Length: 300 mm Thickness:...
Producer: Rebeltec Model: SliderM+ Width: 350 mm Length: 250 mm...
Producer: Rebeltec Model: SliderS+ Width: 250 mm Length: 200 mm...
Gaming USB Sound Card Chipset: CM108B 2.0 Cable length: 1.2m Wire...
TrueWireless Stereo Plus for easier pairing and better connectivity Up...
TrueWireless Stereo Plus for easier pairing and better connectivity Up...
Reinforced, braided cable braid Quick Charge: 1.5A (max) Features: fast...
iPhone 14 Pro Max Protect phone screen Resistant to scratches and...
iPhone 14 Pro Protect phone screen Resistant to scratches and absorbs...
iPhone 14 Plus Protect phone screen Resistant to scratches and absorbs...
iPhone 14 Protect phone screen Resistant to scratches and absorbs...
iPhone 13 / 13 Pro Protect phone screen Resistant to scratches and...
iPhone 13 Pro Max Protect phone screen Resistant to scratches and...
iPhone 13 Mini Protect phone screen Resistant to scratches and absorbs...
Compatibility: USB v2.0 standard Serial:RS-485 Serial: Screw terminal...
The onboard MAX485 chip is a low power consumption, limited swing rate...
Model: STM32F103C8T6 Core: ARM 32 Cortex-M3 CPU Debug mode: SWD 72MHz...
The case is made of ABS material. Size: 9.5cmx6.2cmx2.7cm Color: white
The case is made of ABS material. Size: 9.5cmx6.2cmx2.7cm Color: transparent
The case is made of ABS material. Size: 9.5cmx6.2cmx2.7cm Color: black
New design ABS case to protect your Raspberry Pi 4 Model B board Can support a dc 5v cooling fan 30x30 The Raspberry Pi 4 and cooling fan are not included.
Color: Transparent *case only. Raspberry board not included
Matching accessory the TEKO cases. Standard VESA 50, 75, 100 Minimalist design Transparent Can be use on monitors or as a wall bracket Simple and intuitive mounting system Please note that you require four M4 screws for mounting on monitors There is no need of screws for mounting the case on the adapter.
Installation Guide: Mount the bottom cover to the Raspberry Pi Install the cooling fan onto the top cover Plug the power cable onto the GPIO port Install the top the bottom cover Package included: Raspberry Pi case DC Fan 30x30x10, 5V 0.2W Screw Set
Color: Raspberry Red & White Parts: 2 Cut-outs for all connection points MicroSD card cut-out Stick on rubber feet for case stability *case only. Raspberry board not included
Color: Black & Gray Parts: 2 Cut-outs for all connection points MicroSD card cut-out Stick on rubber feet for case stability *case only. Raspberry board not included
Colour: Raspberry Red & White Parts: 5 Cut-outs for all connection points MicroSD card cut-out Plastic LED light protector Stick on rubber feet for case stability *case only. Raspberry board not included
Colour: Raspberry Black & Gray Parts: 5 Cut-outs for all connection points MicroSD card cut-out Plastic LED light protector Stick on rubber feet for case stability
The first professional housing solution for your Raspberry Pi B+, 2 & 3 Perfect mounting of the printed circuit board and all connections Snap-on system for easy opening and closing The case openings are designed to allow intuitive cable connection Flame-retardant material The outer corners protrude slightly to protect the connectors Color: Black L x...
The first professional housing solution for your Raspberry Pi B+, 2 & 3 Perfect mounting of the PCB and all connections Snap-on system for easy opening and closing The case openings are designed to allow intuitive cable connection Flame-retardant material The outer corners protrude slightly to protect the connectors Color: Transparent L x W x H (mm):...
Colour: Raspberry Red & White Parts: 5 Cut-outs for all connection points MicroSD card cut-out Plastic LED light protector Stick on rubber feet for case stability
Material: Aluminum Alloy Color: Black Size: 90x57x23mm Weight: 100g approx Use for: Raspberry Pi 4 Model B Package list : 1 x Aluminum Alloy Top 1 x Aluminum Alloy Bottom 12 x Screws 3 x Thermal Tape 1 x Tool
Made from precision-cut aluminium alloy The aluminium body naturally dissipates heat from all directions The tough anodised aluminium body is perfect for keeping your Raspberry Pi safe Assembly is quick and easy, with just 4 sections to fit together
Designed specifically for the needs of the Raspberry Pi 4 Model B Made with aluminum alloy and polished with a modern Space Grey finish for stunning aesthetics Acts as passive cooling Easy assembling With magnetic top to keep the ports safe when not in use